LIPS – massflow meter

Massflowmeter in the control panel housing

  • Processor controlled linearization
  • Taring at the push of a button
  • Bidirectional USB communication
  • Large LCD display
  • 5 selectable units
  • 6 gas standards switchable
  • 9-stage damping
  • Bluetooth interface (optional)

The devices of the LIPS series are mass flowmeters based on the calorimetric (thermal) principle and were specially designed for installation in switchboards. The devices have a large, illuminated graphic LCD for displaying the measured value, as well as an analog current or voltage output.

Based on the robust and highly precise electronics of the BOREAS series, we have developed the LIPS as a measuring device that can convince through its extensive equipment, high accuracy and versatility.
Thanks to temperature-compensated sensors and state-of-the-art process technology, the measuring curve of these devices is linearized and achieves the excellent accuracy that is characteristic of all mensaura flowmeters.

For bidirectional communication, a USB port is available, via which the devices can be configured and remote-controlled. In addition, the USB port of the digital serial output of the measured value is used. This is made possible by an integrated USB-serial converter, which can be addressed under various operating systems with free software.

The devices can be tared at the push of a button, using software or via an externally connected button.
An adjustable 9-stage damping serves to calm the display in the case of unsteady or pulsating flows.

The devices of the LIPS range offer the possibility to switch the unit of the measured value via a button or via the software. For this purpose, four additional units are available in addition to the basic unit “mln / min”.

The devices of the LIPS series are calibrated according to DIN1343 with air (0 ° C and 1013mbar), but a total of six different gas standards can be selected by software.

The illuminated display, various analogue output signals as well as the standard USB connection leave nothing to be desired when handling the LIPS.

General specifications

Device name

Model name

Order number

LIPS

LFT2

82.xxx

Measuring ranges
  • 10 Nml/min
  • 20 Nml/min
  • 30 Nml/min
  • 100 Nml/min
  • 200 Nml/min
  • 300 Nml/min
  • 1000 Nml/min
  • 2000 Nml/min
  • 3000 Nml/min
Accuracy ± 1% rd. + 0,5% fs.
Dynamics 1:10 (10…100%)
Resolution (switchable)

0,001 / 0,01 Nml/min

0,01 / 0,1 Nml/min

0,1 / 1 Nml/min

0,001 / 0,01 Nml/min

0,01 / 0,1 Nml/min

0,1 / 1 Nml/min

Additional selectable units l/h, cm³/min, cm³/sec, in³/min
Adjustable gas standards
  • Din 1343 – (1013mbar / 0°C)
  • Din 102 – (981mbar / 20°C)
  • 936mbar / 20°C
  • 1013mbar / 20°C
  • 760mmHg / 25°C
  • ISO 2533 – (1013mbar / 15°C)
Sensor technology

Unidirectional sensor,

temperature compensated

Flow direction

Only positive flow

Calibrated at DIN 1343

 

Signal outputs
Voltage output

0..10V – unidirectional sensor

(0V…+10V)

Current output (optional) 4…20mA – unidirectional sensor
Digital output

USB serial converter integrated,

bidirectional communication

 

Power supply
Power supply 12V…24V DC / regulated
Power consumption

Typical 70mA at 12V, 55mA at 24V

plus current output

Electrical connection 5 pin. connector, type MC000091

 

 

 

 

Operating limits
Temperature range 0…50°C
Max. permissible flow 20 l/min
Max. permissible both side pressure
  • 25 PSI
  • 100 PSI – optional*
Warm-up time 30 min min for optimal results
Medium Air and dry, non corrosive gases

 

USB interface
USB port USB type B / mini
Transmission parameters

Baud rate: 9600

Data bits: 8

Stop bits: 1

Parity: none

Flow control: Xon / Xoff

 

Mechanical properties
Pressure connections

Hose connection with union nut:

  • 6/4 (4mm inside) – standard

Plug-in hose connection:

  • 6/4 (4mm inside)
Dimensions 100 x 75 x 155 mm
Weight 350 g
Enclosure material Noryl (PPE)
Mounting position Any
Protection class None

 

Scope of supply
Accessories (included) Connector 5-pin, Typ MC000059

* On request (not available for all devices)

Data sheet:

Operating instructions, software and further downloads can be found here.

Options
Current output 4…20mA
Digital output Bluetooth, virtual com-port

* On request (not available for all devices)

Questions to the product:

Here are some answers: +49 (0)9082 / 918 2221 or info@mensaura.de

To the shop / quote: